reset button on electric water heater doesn t click

Let's talk about an important topic that many homeowners might encounter at some point - resetting a water heater. Whether you have a gas water heater or an electric hot water tank, knowing how to reset it can save you from a stressful situation. So, let's dive in and learn the steps to reset your water heater!

Resetting a Gas Water Heater

If you have a gas water heater, the first step is to locate the reset button. It is usually found near the thermostat control valve. Once you find it, here's what you need to do:

1. Turn off the gas supply: Before attempting any reset, make sure to turn off the gas supply to the water heater. This is crucial for your safety.

2. Press the reset button: Use a small tool or the end of a pencil to press the reset button. Hold it down for about 30 seconds. This allows the gas valve to reset and relight the pilot light.

3. Release the button: After 30 seconds, release the reset button.

4. Turn on the gas supply: Once the button is released, you can turn on the gas supply again.

5. Check for ignition: Look for the pilot light through the sight glass. If it's not lit, you may need to repeat the reset process or seek professional assistance.

6. Wait for the water to heat up: Give your gas water heater some time to heat up the water. This may take a little while.

Resetting an Electric Water Heater

If you have an electric hot water tank, the process of resetting it is slightly different. Here's what you need to do:

1. Turn off the power supply: Locate your home's circuit breaker panel and turn off the breaker that controls your electric water heater. This will cut off the power supply.

2. Remove the access panel: On your water heater, find the access panel that covers the thermostat and heating elements. Use a screwdriver to remove it.

3. Press the reset button: You will see a red reset button on the thermostat. Press it and hold it down for about 30 seconds.

4. Release the button: After 30 seconds, release the reset button.

5. Replace the access panel: Securely replace the access panel that you removed earlier.

6. Turn on the power supply: Go back to your circuit breaker panel and turn on the breaker for your electric water heater.

7. Give it time to heat: Similar to the gas water heater, allow your electric hot water tank some time to heat up.

Please Note

While resetting your water heater can often solve common issues, it's important to note that if you are facing frequent problems or if the reset process doesn't work, it's best to call a professional plumber. They have the expertise to diagnose and fix more complex water heater issues.

Additionally, it's important to follow safety precautions when dealing with gas or electricity. If you're unsure or uncomfortable with any step of the reset process, it's always better to seek professional help instead of risking your safety.

Remember, knowing how to reset your water heater can come in handy during those unexpected moments when hot water suddenly stops flowing. By following these steps, you'll be well-prepared to handle the situation and restore hot water to your home. Stay safe, stay informed, and enjoy the comforts of a reliable water heater!